Sargon Automation

Endurance testing stand for outdoor lamps (repeated thermal cycling). The system consists of a thermostated chamber which can simulate various thermal regime and a rack for supplying  the lamps  and measuring of their electrical parameters.

• Internal Dimensions / Volume: xxx;
• Temperature range: 20 to 80 ^oC;
• Temperature  Non-uniformity inside working space <1 ° C after temperature stabilization;
• Five point temperature measurement inside the chamber; inside air homogenization by forced circulation;
• Two safety thermostats (one user programmable) ;
• Lamps power supply:
  • 6 channels 0-270 Vrms / 50Hz resolution 0.1 V, Imax - 4 Aeff with short-circuit protection;
  • Line stabilizaton: ± 0.1%,load stabilization: ± 1%;
  • Allowed load factor 0.8 ÷ 1 (inductive or capacitive) ;
  • Maximum active power at load factor 0.4 (malfunction of a fluorescent lamp): 400 W;
•  6 galvanic insulated channels measurement system for Ueff, leff, rack detachable for calibration;
• Measuring range: Ueff = 0 ÷ 270 V, leff = 0 ÷ 4 A;
• Tabular or graphical disply of measured / calculated parameters and storing this information to generate reports;
• Programmable on/off sequences on each channel  according to test specification; programmable test duration;
• Test performing interruption (and measured data saving up to that point) in case of Power Failure, automatic test  resuming  when the power reestablishes;
• Visual Programming (without writing code) of test parameters;
• Chamber inside temperature measuring and storing during the test, inclusion in the test report;
• Generation, saving and printing of test reports in .pdf format (virtual printer) to be then stored electronically;
• Power supply / Consumption: 3x380 VAC / 50 Hz, Pmax = 8 KW.