Sargon Automation

Expandability allows flexibility to configure for different measurement conditions
  Real time remote monitoring and control via Ethernet, Wireless LAN* and USB (Software is standard accessories)
Bidirectional communication between PLC and GLT400 via Modbus/TCP, Start or stop command can be sent from PLC.
A more complex system can be configured using the GL840 as Main Unit and up to 5 GLT400 as Remote Terminal Units. GL840 ensures setup and control of the system and also captured data from GLT400 units can be stored on its internal memory. Communications between the Main Unit and Remote Units via Ethernet or Wireless LAN. Up to 200 channels / system can be assembled.
 Voltage:  20 mV - 100 V

 Temperature: -20 ℃ up to 60 ℃

Thermocouple：K, J, E, T, R, S, B, N, C (WRe5-26)
RTD (Resistance Temperature Detector): Pt100, JPt100,Pt1000 (IEC751)
Humidity　
0 to 100 % RH - using the humidity sensor
4-20mA Current
using optional shunt resistance 250Ω  Input 

• Logic/Pulse inputs (4 channels)
• Pulse mode: Instant/Counts/Revolutions
• Signal input for external trigger or external sampling.

Output

• Alarm output (4ch) When the input value exceeded the threshold level, output the alarm.
• Output format: Open collector output (5 V, pull-up resistance 10KΩ).

• Built-in 4GB Flash Memory
• SD Card Slot
• Support SDHC memory card
• Up to 32GB

*When the optional wireless unit (B-568) is inserted, the SD CARD cannot be inserted.
*Maximum capture capacity in one file is 2GB
 

Specifications & Accessories
 

• Main unit specifications
• Analog Input terminal specifications (Option)
• Options & accessories

Item		Description
Number of analog terminal units		Maximum 10 units (200CH)
How to connect Analog Terminal Unit		Direct-connect or connect with the extension terminal connection cable (sold separately) between the GLT400 and terminal unit, or between terminal units. Cables are 50cm or 2m length.
Memory devices	Memory capacity (*1)	Internal memory (MEM) : approx. 4GB
		SD CARD slot: 1 (Compatible with SDHC, up to approx. 32GB memory available. The memory format only supports FAT/FAT32. )
	Memory contents	Setup conditions, Measured data
PC Software		Standard Accessories (GLT400 Setting App, GL-Connection）
PC I/F	Types	Ethernet (10BASE-T/100BASE-TX), USB 2.0, Wireless LAN (Option)
	Functions	Setup and control of the GLT400 from PC, Data transfer to the PC, Connect to network as a remote terminal unit of GL840
	Ethernet functions	Web server functions, FTP server function, FTP client function, NTP client function, DHCP client function, Modbus/TCP Protocol
	USB functions	USB drive mode:Transfer and delete the captured files in the internal memory or SD CARD
Operating Environment		-20 to 60°C (Temperatures vary by analog terminal, AC adapter: 0 to 45°C) 5 to 85%R.H. (non condensed) (When using the USB PD as the power supply, the spec. is based on power supply requirements.)
Power source	AC Adapter	100 to 240 V AC, 50/60 Hz
	DC power	8.5 to 24V DC (maximum 26.4V) (DC drive cable (option B-514) is required))
	USB PD	USB PD compatible, external USB PD compatible battery (USB Power Delivery Revision 2.0 later)
External dimensions (approx.) [W×D×H] (*2)		Input terminal (B-564) or Screwless terminal (B-564SL) is attached: 187.5 × 183 × 65.5 mm (excluding protrusions)
		Input terminal (B-565): 187.5×183×65.5mm 　(excluding protrusions)
Weight (approx.) (*2)		1120 g (In case input terminal (B-565) is attached: Differ according to terminal type)
Others		Vibration -tested condition: Automobile parts Type 1 Class A equivalent

(*1) Possible to save up to 2GByte for one file.
(*2) Main unit, Anlalog terminal and Terminal base unit are installed. AC adapter is not included in dimensions and weight specification.

Item		Standard terminal （B-564）	Screwless terminal （B-564SL）	Withstand high-voltage high-precision terminal （B-565）
Number of analog channels		20ch	20ch	20ch
Input terminal type		M3 screw type terminal	Screwless terminal	M3 screw type terminal
Input method		Photo MOS relay scanning system. All channels isolated balanced input * Terminal b to be used to connect the Resistance bulb is shorted within all channels.
Sampling speed		10msec to 1 hour depending on configuration
Measurement range	Voltage	20・50・100・200・500mV, 1・2・5・10・20・50・100V, 1-5V F.S. (Full Scale)
	Temperature	Thermocouple: K・J・E・T・R・S・B・N・C (WRe5-26) RTD (Resistance Temperature Detector): Pt100・JPt100・Pt1000 (IEC751) Temperature range: 100 ° C, 500 ° C, 2000 ° C (Fahrenheit: 150 ° F, 750 ° F, 3000 ° F)
	Humidity	0 to 100 % (using the humidity sensor (option B-530))
A/D converter		Sigma-Delta type, Resolution: 16-bit (effective resolution: 1/40000 of the +/- range)
Maximum input voltage	Between (+) / (-) terminal	20 mV to 2 V range: 60 Vp-p, 5 V to 100 V range: 110 Vp-p
	Channels ((-) / (-))	60Vp-p		600Vp-p
	Channel / GND	60Vp-p		300Vp-p
Filter (moving average basis)		Off, 2, 5, 10, 20, 40
Operating environment		-20 to 60 ºC (5 to 85%R.H.)		0 to 45℃ (5 to 85%R.H.)

Item	Model Number	Description
Standard Terminal	B-564	Analog Input terminal
Screwless terminal	B-564SL	Analog Input terminal
Withstand high-voltage high-precision terminal	B-565	Analog Input terminal
Base unit for input terminal	B-566	Base unit for input terminal (B-564, B-564SL or B-565)
Connection cable for extension terminal (50 cm)	B-567-05	Cable to connect GLT400 and B-566, 50 cm long
Connection cable for extension terminal (2 m)	B-567-20	Cable to connect GLT400 and B-566, 2 m long
Wireless LAN unit	B-568
Bracket for DIN rail (extension terminal)	B-540
Terminal base cover	B-588	* Compatible with all the terminal, except using with shunt resistor.

Models
GLT 400	Livrare din stoc In stock