Sargon Automation

PXIS-2719A is a 3U PXI/cPCI chassis with 1 system slot and 17 peripheral slots, PXI Hardware Specification Rev. 2.2 compliant.
The PXIS-2719A is designed with an external 10 MHz reference clock input and inteligent chassis management for fan speed, system voltages, internal temperature.

Innovative Cooling Mechanism
The ADLINK PXIS-2719A features an innovative design for heat dissipation. The cooling fans are placed in the rear section of the chassis where cool air is pulled in through apertures on the bottom and exhausted through the back. This new design gives uniform air flow for each PXI slot and exceptional cooling capability. When this chassis is installed in a rack, the new cooling design minimize the drawing in of hot air from the rear area, where all other devices exhaust, while maintaining a steady temperature inside the chassis.

Intelligent Chassis Management
The PXIS-2719A has a built-in control board that monitors and manages chassis status, including internal temperature, fan speed, and voltages. Using the RS-232 monitoring port, the chassis status information can be exported to another computer for remote management. The control board can also accept commands from the remote system to allow remote power on/off and fan speed control of the PXIS-2719A chassis.

Flexible Rack-mount Design
ADLINK also provides an optional rack-mount kit to allow flexible installation of the PXIS-2719A in a rack. By adjusting the position of rack-mount bracket, the PXIS-2719A can be recessed in a cabinet rack up to 10 centimeters to accommodate external mechanical parts on the front side, such as complicated connectors/wires and mass interconnect modules.

• Rack-mountable 19-slot PXI chassis with one system slot and eighteen PXI/CompactPCI peripheral slots
• PXI Hardware Specification Rev. 2.2 compliant
• Advanced forced-cooling mechanism for efficient and uniform heat dissipation
• External 10 MHz reference clock input via BNC connector
• 0°C to 55°C extended operating temperature range
• Intelligent chassis monitoring/control: Automatic fan speed control, chassis status monitoring /exporting and remote chassis power on/off control (RS-232 interface). Power, temperature and fan monitoring LEDs
• 600 W industrial-grade AC power supply